Pest Control

Pest Control Regulation and Chemical Usage in Missouri

In Missouri, the state regulates the use of pest control chemicals through the Missouri Department of Agriculture. The Department of Agriculture enforces state and federal laws and regulations related to pesticide registration, certification, and use.

To apply pesticides in Missouri, individuals must hold a valid pesticide applicator’s license issued by the Department of Agriculture. The state requires that all pesticide applicators complete an approved training program and pass an exam to become licensed.

The state also regulates the sale and distribution of pesticides through its pesticide registration program. All pesticides sold in Missouri must be registered with the Department of Agriculture and comply with state and federal regulations.

The Missouri Department of Agriculture is also responsible for investigating and responding to pesticide-related complaints and incidents. This includes enforcing state laws related to pesticide drift and taking action against individuals who violate pesticide regulations.

Overall, Missouri has strict regulations in place to ensure the safe and responsible use of pest control chemicals. By enforcing these regulations, the state aims to protect public health, the environment, and agricultural crops from the harmful effects of pesticides.

Find the Category Leaders in Pest Control Software

Chemical names and recommended usage for pest control in MO

The chemical names for pest control in Missouri can vary depending on the specific pesticide product being used. Here are some common active ingredients found in pest control products in Missouri:

Glyphosate:

This herbicide is commonly used to control weeds in agricultural and non-agricultural settings.

The amount of glyphosate to apply in Missouri varies depending on the crop, the pest, and the specific glyphosate product being used. The amount of glyphosate to apply is determined by the manufacturer and is specified on the product label, which must be followed to ensure the safety and effectiveness of the pesticide.

Glyphosate is a herbicide commonly used in Missouri to control weeds in agricultural and non-agricultural settings. When using glyphosate, it’s important to follow label instructions carefully, including the recommended application rate, timing, and method of application.

For example, the label for a commonly used glyphosate product in Missouri, Roundup, recommends an application rate of 22-64 fluid ounces per acre, depending on the type and size of the weeds being targeted. The label also specifies the appropriate timing and method of application, such as spraying when weeds are actively growing and using proper equipment to ensure even coverage.

Chlorpyrifos:

This insecticide is used to control a range of pests, including ants, termites, mosquitoes, and other insects.

The amount of chlorpyrifos to apply in Missouri varies depending on the crop, the pest, and the specific chlorpyrifos product being used. Chlorpyrifos is an insecticide that is commonly used in Missouri to control a range of pests, including ants, termites, mosquitoes, and other insects.

When using chlorpyrifos, it’s important to follow label instructions carefully, including the recommended application rate, timing, and method of application. The label for a chlorpyrifos product will provide specific instructions for use, including the maximum amount of product that can be applied per unit area, such as per acre or per 1000 square feet.

For example, the label for a commonly used chlorpyrifos product in Missouri, Lorsban, recommends an application rate of 0.5-2 pints per acre, depending on the pest being targeted. The label also specifies the appropriate timing and method of application, such as using ground or aerial equipment to ensure even coverage.

Imidacloprid:

This insecticide is used to control pests such as aphids, whiteflies, and termites in a variety of settings, including agricultural, ornamental, and residential.

The amount of imidacloprid to apply in Missouri varies depending on the crop, the pest, and the specific imidacloprid product being used. Imidacloprid is an insecticide that is commonly used in Missouri to control pests such as aphids, whiteflies, and termites in a variety of settings, including agricultural, ornamental, and residential.

When using imidacloprid, it’s important to follow label instructions carefully, including the recommended application rate, timing, and method of application. The label for a specific imidacloprid product will provide specific instructions for use, including the maximum amount of product that can be applied per unit area, such as per acre or per 1000 square feet.

For example, the label for a commonly used imidacloprid product in Missouri, Merit, recommends an application rate of 0.2-0.4 fluid ounces per 1000 square feet for turfgrass and 0.025-0.1 fluid ounces per inch of trunk diameter for trees and ornamentals. The label also specifies the appropriate timing and method of application, such as using a soil injection, drench, or foliar spray.

Permethrin:

This insecticide is used to control a variety of pests, including mosquitoes, ticks, and other insects, in both residential and commercial settings.

The amount of permethrin to apply in Missouri varies depending on the crop, the pest, and the specific permethrin product being used. Permethrin is an insecticide that is commonly used in Missouri to control a variety of pests, including mosquitoes, ticks, and other insects, in both residential and commercial settings.

When using permethrin, it’s important to follow label instructions carefully, including the recommended application rate, timing, and method of application. The label for a specific permethrin product will provide specific instructions for use, including the maximum amount of product that can be applied per unit area, such as per acre or per 1000 square feet.

For example, the label for a commonly used permethrin product in Missouri, Permethrin SFR, recommends an application rate of 0.4-0.8 fluid ounces per 1000 square feet for control of mosquitoes and 0.4-0.8 fluid ounces per 1000 square feet for control of ticks. The label also specifies the appropriate timing and method of application, such as using a backpack or handheld sprayer.

Dicamba:

This herbicide is used to control broadleaf weeds in agricultural and non-agricultural settings.

The amount of dicamba to apply in Missouri varies depending on the crop, the pest, and the specific dicamba product being used. Dicamba is a herbicide that is commonly used in Missouri to control broadleaf weeds in agricultural and non-agricultural settings.

When using dicamba, it’s important to follow label instructions carefully, including the recommended application rate, timing, and method of application. The label for a specific dicamba product will provide specific instructions for use, including the maximum amount of product that can be applied per unit area, such as per acre or per 1000 square feet.

For example, the label for a commonly used dicamba product in Missouri, Xtendimax with VaporGrip Technology, recommends an application rate of 22-44 fluid ounces per acre for control of various broadleaf weeds in soybeans, cotton, and other crops. The label also specifies the appropriate timing and method of application, such as using ground or aerial equipment to ensure even coverage and avoiding application during temperature inversions.

Atrazine

The amount of atrazine to apply in Missouri varies depending on the crop and the specific atrazine product being used. Atrazine is a herbicide that is commonly used in Missouri to control weeds in corn, sorghum, and other crops.

When using atrazine, it’s important to follow label instructions carefully, including the recommended application rate, timing, and method of application. The label for a specific atrazine product will provide specific instructions for use, including the maximum amount of product that can be applied per unit area, such as per acre or per 1000 square feet.

For example, the label for a commonly used atrazine product in Missouri, AAtrex 4L, recommends an application rate of 1-2 quarts per acre for pre-emergent control of various weeds in corn and sorghum. The label also specifies the appropriate timing and method of application, such as using ground equipment to ensure even coverage.

2,4-D

The amount of 2,4-D to apply in Missouri varies depending on the crop, the pest, and the specific 2,4-D product being used. 2,4-D is a herbicide that is commonly used in Missouri to control broadleaf weeds in turfgrass and agricultural crops.

When using 2,4-D, it’s important to follow label instructions carefully, including the recommended application rate, timing, and method of application. The label for a specific 2,4-D product will provide specific instructions for use, including the maximum amount of product that can be applied per unit area, such as per acre or per 1000 square feet.

For example, the label for a commonly used 2,4-D product in Missouri, Weedone LV4 EC, recommends an application rate of 1-4 pints per acre for control of various broadleaf weeds in agricultural crops. The label also specifies the appropriate timing and method of application, such as using ground equipment to ensure even coverage.

In turfgrass, the recommended application rate of 2,4-D can vary depending on the specific turfgrass species and the weed being targeted. For example, the label for a commonly used 2,4-D product in Missouri, Trimec Classic, recommends an application rate of 1-2 fluid ounces per 1000 square feet for control of broadleaf weeds in cool-season turfgrasses such as Kentucky bluegrass and tall fescue.

Fipronil

The amount of fipronil to apply in Missouri varies depending on the pest and the specific fipronil product being used. Fipronil is an insecticide that is commonly used in Missouri to control ants, termites, and other pests in residential and commercial settings.

When using fipronil, it’s important to follow label instructions carefully, including the recommended application rate, timing, and method of application. The label for a specific fipronil product will provide specific instructions for use, including the maximum amount of product that can be applied per unit area, such as per acre or per 1000 square feet.

For example, the label for a commonly used fipronil product in Missouri, Termidor SC, recommends an application rate of 0.06 fluid ounces per gallon of water for control of termites and 0.075 fluid ounces per gallon of water for control of ants. The label also specifies the appropriate timing and method of application, such as using a low-pressure spray to apply the product around the perimeter of buildings.

Bifenthrin

The amount of bifenthrin to apply in Missouri varies depending on the pest and the specific bifenthrin product being used. Bifenthrin is an insecticide that is commonly used in Missouri to control a range of pests, including ants, termites, and other insects, in both residential and commercial settings.

When using bifenthrin, it’s important to follow label instructions carefully, including the recommended application rate, timing, and method of application. The label for a specific bifenthrin product will provide specific instructions for use, including the maximum amount of product that can be applied per unit area, such as per acre or per 1000 square feet.

For example, the label for a commonly used bifenthrin product in Missouri, Talstar P Professional, recommends an application rate of 0.25-1 fluid ounce per gallon of water for control of various pests, including ants and termites. The label also specifies the appropriate timing and method of application, such as using a low-pressure spray to apply the product to the exterior and interior of buildings.

It’s important to note that the use of pesticides should always be done according to label instructions and with caution to avoid negative impacts on human health and the environment. It’s also recommended to consult with a licensed pest control professional to determine the best pest control solution for your specific needs.

Pesticide Limit in Missouri

In Missouri, pesticide application limits vary depending on the type of pesticide and the specific crop or pest being targeted. The Missouri Department of Agriculture regulates pesticide use in the state and sets limits for pesticide application rates, application methods, and pre-harvest intervals.

Pesticide labels provide instructions for use, including application rates and methods, which must be followed to ensure the safety and effectiveness of the pesticide. These labels also specify any application restrictions, including the maximum application rate and frequency, to prevent overuse and minimize any potential harm to human health and the environment.

The Missouri Department of Agriculture requires that all pesticide applicators be trained and licensed to ensure the safe and effective use of pesticides. In addition, the department monitors and enforces pesticide use through inspections and investigations of pesticide-related incidents and complaints.

It’s important for individuals who use pesticides to carefully read and follow all label instructions, including any application restrictions, and to use pesticides with caution to minimize any negative impact on human health and the environment.

Track Chemical Usage

ServiceWorks helps you track your chemical usage easily. Use predefined forms with chemical names listed and easily add your custom names to the form. Schedule a demo with our product expert to see how you can save time.

Author